Configuration of the Sealing Area
What are the important role(s) of five key consumable parts?
|
Parts |
Role |
|
Heating Element |
Provides heat for sealing. Replace when it breaks, unevenness is generated, or the seal becomes messy, etc. |
|
Silicone Rubber |
Secures the sealing position. Replace when unevenness is generated or the seal becomes messy, etc. |
|
Teflon Sheet |
Helps to release the sealed bags from the heater. Replace when it breaks, burns, or the seal becomes messy, etc.
Note: Teflon sheet is provided in sheet except for some models. |
|
Glass Tape |
Insulates the sealer body from the heating element. Replace when the heating element breaks often, the seal becomes messy, etc.
NOTE: Glass tape is the Teflon sheet with the adhesive layer. It includes the width of 13mm, 19mm, and 25mm. |
|
Sarcon Sheet |
Provides enhanced insulation. Replace when the heating element breaks often, the seal becomes messy, etc.
NOTE: It includes the width of 6mm, 10mm, and 13mm. |
The configuration of the sealing area for dual and single heating type of Fuji Impulse sealers are shown as below.
| 
